Category Archives: Woodworking

Harbor Freight Circular Saw Blade Sharpener Mod

A while ago I purchased the Chicago Electric Power Tools Professional Series 9 Amp Circular Saw Blade Sharpener from Harbor Freight.  I did not think that I would be able to get the professional results I got when I sent … Continue reading

Posted in Tools and Machinery, Woodworking, Work Shop | Leave a comment

End Grain Walnut Cutting Board

I have another cutting board to make.  I would have liked to make it out of maple, but I do not have any maple milled.  But I do still have a lot of walnut.  This time I want to make … Continue reading

Posted in Woodworking | Leave a comment

Cutting Board Butter

I have been making my own cutting board finish, which I like to call Cutting Board Butter, made from bee’s wax and mineral oil.  This is very easy to make.  You can order melting bee’s wax pellets online.  Simply add … Continue reading

Posted in Shop Tips, Woodworking | Leave a comment

Chamfer Sanding Block + Free Plan

I am making an end grain cutting board, and for the edge treatment, I decided to go with chamfers.  Now while the router left a nice edge, it did need sanding.  I could have just used a sanding block and … Continue reading

Posted in Plans, Shop Tips, Woodworking | Leave a comment

Repairing a Broken Corner

So this isn’t really a corner.  Well, kind of.  It’s the corner of a walnut strip in a cutting board I was making. After gluing up the board, and cleaning off the squeeze out, I noticed one of the strips … Continue reading

Posted in Shop Tips, Woodworking | Leave a comment

Making Celtic Knot Pen Blanks

I have a couple of pens to make.  I wanted to make them similar but contrasting, and have always wanted to try making Celtic knot blanks.  This was the perfect opportunity.

Posted in Wood Turning, Woodworking | Leave a comment

Walnut Cutting Board

I made this cutting board about 2 1/2 years ago.  Well, I FINISHED it 2 1/2 years ago.  I started it a year before that.  It sat unfinished for a whole year.

Posted in Woodworking | Leave a comment

Laser Engraving Pens

Years ago, shortly after I began pen turning, I discovered that you can have your turned pens laser engraved.  I would send them off and they would be returned with my requested text engraved on them.  They were always spectacular, … Continue reading

Posted in Laser Engraving and Cutting, Wood Turning, Woodworking | Leave a comment

Cheap Lathe Tools

About 20 years ago, Marisa and I went to a woodworking demo at a nearby woodworking store.  At this Demo, many tools were being displayed and demonstrated.  Among them, Dick Sing was turning Christmas ornaments on a Jet 1236 lathe.  … Continue reading

Posted in Reviews, Uncategorized, Wood Turning, Woodworking | Leave a comment

Laser Cutting Garden Stakes

Today I’m cutting out some garden stakes on the laser. I’m using LightBurn for the cutting software, and my laser is a Comgrow Comgo Z1 10W LED Laser. I purchased a set of vector graphics of 84 different garden stakes … Continue reading

Posted in Laser Engraving and Cutting, Woodworking | Leave a comment